ENDURANCE TESTING | Continental

Products for Car / 4x4 / Van

R&D LABS

HIGH-TECH PRODUCT TYRES

ENDURANCE TESTING

The standard test is a marathon event in itself: the tires run in the test rig for over a month – up to 1,000 hours to be more precise – at a speed of 120 km/h. The Endurance Testing department has various drum test rigs that allow several car tires at a time to be put through their paces in a wide range of test positions.

endurance testing icon

The standard test is a marathon event in itself: the tyres run in the test rig for over a month – up to 1,000 hours to be more precise – at a speed of 120 km/h.

high-speed test rigs

Endurance tests in many different test positions

A large number of drum test rigs conduct endurance testing on truck tyres in a variety of test positions. There are also high-speed test rigs for testing car tyres at speeds as high as around 400 km/h. Further test machines capable of applying high loads are available for testing truck tyres and special agricultural and industrial tyres. Endurance testing doesn’t look at how a tyre wears but what it can actually withstand: When and why does it reach the limit of its structural endurance? In addition to high-speed testing, there are also burst, bead unseating and plunger tests, which are carried out to ensure and document compliance with all regulatory requirements. On top of this, internal testing beyond the limits of structural endurance is also routinely carried out.

preliminary inspection of the tyre

The Endurance Testing department

Endurance Testing is one of the largest test departments within the R&D arm of Continental Tyres. This is where prototypes for new tyre developments as well as random samples from ongoing production are taken for endurance testing. This involves a preliminary inspection of the tyre before it is fitted onto a special wheel rim. The tyre is conditioned, i.e. pumped up to the required test pressure and brought up to temperature, before being mounted on the test rig for testing at the desired load and speed. The tyre is regularly inspected over the course of the test run, after which it is sent to the internal analysis group where it is not only cut open, but also undergoes X-ray or CT scanning. The investigations shed light on where the tyre failed structurally and why.

 

Endurance Testing is one of the largest test departments within the R&D arm of Continental Tyres. 

 

Way beyond the speed symbol

The high-speed tests are of particular interest for car and van tyres. These involve testing the tyres under conditions that comfortably exceed their speed rating symbol in order to ensure that the tyre is fit for the market. The test results are evaluated by the tyre analysis specialists and fed back into the tyre development process.

The findings from endurance testing provide vital guidance in product development, helping to make sure that work is progressing in the right direction when creating future tyre models. Quality management testing for current models accounts for around 25 to 30 percent of the test runs. Most test jobs originate from product and platform development and mainly involve original equipment tyres and tyres for the replacement market.

Related Topics

Noise, Vibration & Harshness

Noise, Vibration & Harshness (NVH) Lab

How can tyre road noise be reduced? Finding this out is the job of the team working in the Noise, Vibration & Harshness (NVH) Lab. Tyres are responsible for around 50 percent of the noise produced when driving.

Read More

X-ray and CT tire analysis

Tyre_Analysis

The group of non-destructive testing units, comprising shearography, computed tomography and X-ray analysis, form another department at Continental Tyres R&D.

Read More

Our R&D Labs

R&D LABS

A new tyre has to pass through several sections of Continental’s R&D department before it can go into series production.

Read More